Standard Installation excluding high water table areas and Bio-Pure 6-10
Installing the Bio-Pure Sewage Treatment Plant is quick and easy. This can be self installed and we offer free telephone support. If preferred, we offer a full installation service. Please fill out the quotation form if you would like a quote for supply and installation.
Installation Diagram (the illustrations below are a representation of a standard small treatment system)
1) The Bio-Pure should be at least 7m from a dwelling and not too close to trees, because of the roots.
2) Excavate a hole 2.25m deep by 1.85 m wide using a digger. Ensure the hole is narrower at the bottom.
3) Lower the Bio-Pure into the ground using the digger. Install anchoring kit now, if required.
4) Dig the appropriate depth hole for the inlet invert and make the connection. Ensure the unit is level.
5) Backfill the unit to approx. 700mm, using pea gravel. Partly fill the unit with water.
6) Make the outlet connection (via sample chamber if necessary). Complete backfill and filling with water.
7) Make the electrical connection from an RCD and use a double outside socket.
8) Sit back and relax!